







Free in-home design visit - walk-in showers, tub-to-shower conversions, and Kohler, Moen, and Delta fixtures planned to your exact space
Trusted Walk In Shower for Henderson Homeowners
A walk in shower solves a problem most Henderson homeowners know well: the tub you have is no longer the tub you want. Maybe stepping over a knee-high wall has stopped feeling safe. Maybe the tub swallows half the room and the bathroom feels smaller than it should. Either way, a properly built walk in shower opens the floor up, removes the trip hazard, and gives you a bathroom that fits how you actually live.
We work in one trade, bathrooms, so every project benefits from focused, day-in day-out experience. Our technicians have up to 10 years of experience, and we build walk in showers from the waterproofing layer up, not just the tile you see. Call (833) 954-6011. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Walk In Shower Service Includes
A walk in shower is more than a tile job. It’s a structure with a drain, a slope, a waterproof membrane and a doorless or low-threshold entry, and every one of those layers has to be right or the whole thing fails. Here’s what our service covers, and how we approach each part.
Walk-In Shower Installation
A walk in shower installation builds a new shower from the studs out, sized and shaped around your bathroom rather than forced into a preset frame. It’s the right call when you’re replacing a tub and reworking the layout, or when the current shower is dated, cramped or leaking behind the wall. We handle demolition, rough framing, drain placement, Schluter Systems waterproofing, tile setting and every fixture, so the shower you get is one we designed with you and stood behind through the final inspection. Walk in shower installation in Henderson typically runs $4,185 to $11,160 depending on size and finish level.

Walk-In Shower Builds as a Core Service
Walk in shower builds are one of our three main service lines, not an add-on we price up when a customer asks. That means the design conversation starts with your shower: entry width, bench or no bench, niche placement, glass panel versus open entry, and how the room drains. We’ll help you match the fixture to your budget and style instead of steering you to whatever a single supplier happens to carry. If accessibility is the driver, we plan the threshold height, grab bar backing and clear floor space from the first measurement.

Shower Replacement
Shower replacement swaps out a failing or outdated shower while keeping the same footprint, which keeps the job tighter and the timeline shorter. You need it when the pan is cracked, the grout is failing in a way that keeps coming back, or the previous install was done without a proper waterproofing layer behind the tile. We strip it down, inspect what’s behind the wall, and rebuild with a waterproof system rather than tiling over the problem. Shower replacement in Henderson typically runs $2,790 to $7,905.

Tub-to-Shower Conversion
A tub-to-shower conversion takes out the tub and turns that space into a walk in shower, which is the most common way Henderson homeowners reclaim floor area in a small bathroom. It’s the right fit when the tub is rarely used, when someone in the house needs safer footing, or when you want a modern look without a full bathroom gut. We work in one trade, so the conversion is a defined service with its own scope and pricing, from demo through waterproofing to the final tile edge. Tub-to-shower conversion in Henderson typically runs $3,255 to $9,300. You can read more about it on our walk in shower page.
Waterproofing and Fixture Selection
This is the part of the job nobody sees and everybody suffers for when it’s skipped. We use Schluter Systems waterproofing and tile-edge profiles because they’re the professional standard for keeping water where it belongs, and a shower built that way doesn’t come back as a soft spot in the subfloor years later. On the fixture side, you choose from Kohler, Moen, Delta, American Standard, Toto, Grohe and Sterling, and we’ll walk you through which trim, valve and drain style hold up best in daily use.
Styles & brands we work with
- Walk-in shower
- Tub-to-shower
- Freestanding tub
- Kohler
- Moen
- Delta
- Frameless glass
Brands We Service for Walk In Shower
A walk in shower is only as good as the parts you can’t see behind the tile. We work with Kohler and Delta regularly, and we know where each line wears out: Kohler thermostatic valves tend to go at the cartridge seal, while Delta pressure-balance valves most often show their age at the handle stop. Knowing that up front shapes what we recommend for your shower build, because a valve that’s hard to service later is a valve you’ll regret.
Moen and American Standard come up often on value-focused projects, and both reward careful rough-in work. Moen’s widespread trim rewards proper valve depth, and American Standard shower pans need the subfloor set true before the pan goes down or you’ll hear it flex. We also work with Toto, Grohe and Sterling for higher-end builds, and Schluter Systems for the waterproofing and edge profiles that hold the whole assembly together. Whether you have Kohler, Moen, Delta, American Standard or any other make, we can help.
Signs You Need Walk In Shower Right Now
Some shower problems can wait a few weeks. Others shouldn’t wait past the next few showers. Here’s how to tell which one you’re looking at.
- Water pooling in the pan or spots that never dry. A properly sloped shower pan drains to the weep holes and dries between uses. Standing water means the slope is wrong or the drain weep holes are clogged, and that moisture works its way into the substrate if it’s left alone.
- Soft or spongy floor near the shower edge. If the floor gives underfoot when you step out of the shower, water has likely reached the subfloor past the waterproofing. That’s a rebuild, not a re-caulk.
- Grout or caulk that keeps failing in the same place. Repeated failure at the same joint means movement or moisture behind the tile, not a bad batch of caulk. Re-sealing it over and over just hides the cause while the damage grows.
- Stepping over the tub wall has started to feel risky. A high step is the most common reason Henderson homeowners start looking at walk in showers. If someone in the house has had a near-miss or is unsteady on their feet, the safety math changes quickly.
- Mold or a musty smell that comes back after cleaning. Fiberglass pans and backer board that have absorbed water will keep sprouting mildew no matter how hard you scrub. Once it’s in the assembly, the fix is replacement, not bleach.
Our Walk In Shower Process – Step by Step
Every walk in shower we build follows the same sequence, because the order is what makes the finished shower last. Here’s what to expect from the first phone call to the last inspection.
- 1
Free on-site estimate. We measure the space, check what’s behind the existing wall where we can, and talk through what you want the shower to do for you. You get a written line-item quote with the scope and the price, and the written estimate sets the final price.
- 2
Design and fixture selection. We lay out the entry, bench, niche and drain, then narrow the fixture choice across the brands we work with. You’ll know what’s going in before demo day, not after.
- 3
Permits and prep. Most cities require a permit for a shower rebuild, so we handle the paperwork and the inspection schedule. We protect the floors and the rest of the room before demolition starts.
- 4
Demo, framing and waterproofing. The old tub or shower comes out, we inspect and correct the framing, set the drain and pan, then install the Schluter Systems waterproofing layer and slope. This is the step that decides whether the shower lasts.
- 5
Tile, fixtures and final inspection. We set the tile and edge profiles, install your chosen trim and valve, and finish with the walkthrough and the inspection. We don’t call the job done until the shower drains right and the door or panel closes clean.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk In Shower Cost in Henderson?

Walk in shower installation in Henderson typically runs $4,185 to $11,160, depending on how much of the room you’re changing and how high-end the finish goes. A straightforward replacement in the same footprint usually lands near the lower end, while a full rebuild with new framing, a bench, custom tile work and premium fixtures pushes toward the top. Tub-to-shower conversions sit in their own range at $3,255 to $9,300 because the scope is tighter than a full bathroom remodel but broader than a straight shower swap.
A few things move the number most: the size of the shower, whether the drain has to move, what the tile costs per square foot, and which fixture line you pick. A larger shower with a linear drain and a frameless glass panel costs more than a compact open-entry shower with standard tile, and that’s true regardless of which brands you select.
How do you avoid overpaying? Get a written line-item estimate that separates labor, materials, waterproofing and fixtures, so you can see where the money is going. Ask whether permits and inspections are included. Ask what happens if hidden rot shows up after demo. We give you all three in writing, and the written estimate sets the final price, so there are no change-order surprises once the wall is open. If you’re weighing a walk in shower against a bigger project, our Bathroom Remodeling Henderson page lays out what a full remodel involves. Call (833) 954-6011 – estimates are free.
Walk In Shower Near Henderson – Our Service Area
We build walk in showers for homeowners across the Las Vegas Valley, including Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, Boulder City, Spring Valley, Summerlin, North Las Vegas, Las Vegas and Sandy Valley. Henderson jobs are scheduled with fast dispatch from 7am to 7pm, Sunday through Friday, and the outlying towns get the same written estimate and the same waterproofing standard. If you’re in Whitney, our walk in shower page covers what’s typical there, and the walk in shower page does the same for Paradise. Wherever you are in the valley, call (833) 954-6011 and we’ll get your estimate on the calendar.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Walk In Shower in Henderson

A walk in shower is a shower you step into without lifting your leg over a tub wall or a raised curb, usually with a low or flush threshold and an open entry or a single glass panel. It replaces the tub-and-curtain arrangement with a tiled, waterproofed enclosure built directly into the bathroom floor plan. The result is easier access, fewer places for water to sit, and a cleaner look in a small room.
Most walk in shower installations take one to two weeks of on-site work, with the schedule depending on whether the drain has to move and how complex the tile layout is. Tub-to-shower conversions usually land in that same window, while a straight shower replacement in an existing footprint can run shorter. The permit and inspection schedule adds a few days either way, and your written estimate includes a realistic timeline before work begins.
Walk in shower installation in Henderson typically runs $4,185 to $11,160, with shower replacement at $2,790 to $7,905 and tub-to-shower conversion at $3,255 to $9,300. The range reflects shower size, drain changes, tile choice and which fixture line you select. The written estimate sets the final price, so you’ll know the number before demolition starts. Call (833) 954-6011 for a free estimate.
Yes. We work with Kohler, Moen, Delta, American Standard, Toto, Grohe and Sterling, along with Schluter Systems for waterproofing and tile edge profiles. That range means we can match the fixture to your budget instead of selling you whatever a single catalog carries. Bring the shower valve you already own and we’ll tell you whether it’s worth reusing.
Same-day service is possible on many Henderson walk in shower jobs depending on the schedule, and we’ll tell you honestly on the call whether it fits. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 954-6011 to check availability.
Yes, our walk in shower work carries a workmanship warranty, and we’ll put the terms in writing with your estimate. The waterproofing, tile setting and fixture installation are all covered under that warranty, so you’re not relying on a verbal promise. We also pull the permits and pass the inspections, which gives you a record of the work beyond our own paperwork.
Clear the bathroom of towels, toiletries, rugs and anything on the walls, and make sure we have a clear path from the door to the work area. Empty the vanity cabinet if the plumbing under it is part of the job, and let us know about pets and where they’ll be during demo. Leave the rest to us: we protect the floors and handle the dust control, permits and inspection scheduling.
Schedule Your Walk In Shower Service in Henderson Today
If the tub has to go, or the shower you have is failing at the seams, we’d like to give you a written line-item estimate with the scope, the fixtures and the price in one place. No obligation, no pressure, and the written estimate sets the final price. Call (833) 954-6011. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Bathroom Remodeling Henderson.










