







Free in-home design visit - walk-in showers, tub-to-shower conversions, and Kohler, Moen, and Delta fixtures planned to your exact space
Trusted Tub to Shower Conversion for Henderson Homeowners
If your tub takes up half the bathroom and nobody has soaked in it for years, a tub-to-shower conversion in Henderson turns that dead space into a walk-in shower you’ll actually use. It also removes the high step that makes a standard tub risky for anyone with balance or mobility concerns. Every project we take on is a bathroom project; that’s the only trade we work in, so the waterproofing details, drain placement and tile work get the attention a generalist juggling five trades can’t give them. Our technicians have up to 10 years of experience, we use Schluter Systems waterproofing on tile installations, and we can work with Kohler, Moen, Delta or American Standard fixtures depending on what you want. Call (833) 954-6011 to schedule a free estimate. We answer 24/7.
What Our Tub to Shower Conversion Service Includes
Every conversion we plan covers three things: removing the old tub and its surround, rebuilding the wet area so water stays where it belongs, and finishing the shower to match the rest of the room. Here’s how each piece of that work breaks down.
Tub Removal and Rough-In Inspection
Before anything new goes in, the old tub, surround and any framing behind it come out cleanly. This is also when we look at what the previous installation left behind: water staining, soft drywall, a drain that was never quite centered. If the rough-in plumbing or the subfloor needs correction, that shows up in the written estimate before work continues, not as a surprise change order halfway through.

Waterproofing and Shower Pan Construction
A shower lives or dies on what’s behind the tile. We build the pan and walls with Schluter Systems components, which means a bonded waterproof membrane rather than a painted-on coating over greenboard. This is the step that separates a shower still tight after years of daily use from one that starts showing water at the baseboard within a couple of seasons.

Tile and Finish Selection
Once the wet area is sealed, the visible work starts: wall tile, floor tile, niche placement, trim and a shower door or curtain rod depending on the layout. We help you choose finishes that suit the room’s size and how much cleaning you’re willing to do, and we’ll walk you through the trade-offs of large-format tile versus a smaller pattern on a sloped pan. Nothing gets ordered until you’ve signed off on the selections.

Fixture Selection Across Brands
Your showerhead, valve trim, handle and drain cover are where the conversion starts feeling like yours instead of generic. We work with a range of professional fixture brands, so the trim can match a Moen valve you already trust or move up to a Kohler or Grohe setup if that’s the look you’re after. We’ll talk through finish durability and how each brand’s trim lines up with the valve body before anything is ordered.
Accessibility and Layout Adjustments
Many Henderson homeowners convert a tub because they want a low or zero-threshold entry, a built-in bench, or grab bar blocking installed while the walls are open. All of that is easier and less expensive to plan into the conversion than to add later. We’ll talk through door style, curb height and where support should go so the finished shower works for everyone in the house.
Final Walkthrough and Cleanup
When the tile is set, grouted and sealed, we test the drain, check the door or curtain enclosure, and walk the room with you before we call it done. Debris and old tub material leave with us. If anything looks off at that walkthrough, it gets addressed then, not after you’ve moved your shampoo back in.
Styles & brands we work with
- Walk-in shower
- Tub-to-shower
- Freestanding tub
- Kohler
- Moen
- Delta
- Frameless glass
Brands We Service for Tub to Shower Conversion
Fixture brands matter less than the person installing them, but the brand still shapes how a shower feels and how long the trim holds up. We work with Kohler because their valve and trim lines give you real choice in finish and style without forcing a whole-system swap. Moen is a common choice for homeowners who want a familiar, widely supported valve with trim options that fit a range of budgets, and we know how their cartridges and trim rings line up with a new shower wall.
Delta and American Standard round out the everyday side of the spectrum: solid, straightforward fixtures that pair well with a conversion where the budget needs to stay focused on waterproofing and tile. Whether you have Kohler, Moen, Delta, American Standard or another make in mind, we can help you match the fixture to your budget and the look you want. We’re not locked into a single brand or a single catalog, and that flexibility is the point.
Signs You Need Tub to Shower Conversion Right Now
- The tub goes unused while the shower gets all the traffic. If the tub collects dust and the shower curtain is the only thing standing between you and a remodel, a conversion puts that square footage to work. You’ll gain usable floor space and lose a fixture nobody touches.
- Climbing over the tub wall has become a worry. A high step into a wet tub is one of the most common fall risks in a bathroom. A low-threshold or curbless shower removes that step and makes the room safer for everyone, not just the person who raised the concern.
- You’re seeing soft spots, staining or peeling near the tub surround. Water that gets behind a tub surround rarely stays put. Staining at the base, soft drywall or lifting caulk usually means the waterproofing has already failed, and a conversion lets us rebuild that wet area properly instead of patching over it.
- The tub or surround is cracked, chipped or dated beyond repair. A hairline crack in an acrylic tub can turn into a leak into the floor below. When the fixture is at the end of its life, replacing it with a shower is often a better use of the budget than another tub.
- You’re planning to stay in the home and want it to age with you. Converting now, while you can choose the layout and finishes yourself, is far easier than retrofitting accessibility later. Blocking for grab bars and a bench seat cost little when the walls are already open.
Our Tub to Shower Conversion Process – Step by Step
- 1
Free in-home estimate and measurements. We look at the existing tub, the surrounding walls, the drain location and the room’s dimensions. You get a written, line-item estimate that spells out demo, waterproofing, tile and fixtures, so you can see exactly what you’re paying for. There’s no obligation and no pressure to sign on the spot.
- 2
Selections and scheduling. You pick tile, fixtures and layout details from the brands we work with, and we confirm lead times before booking the install. Anything that needs to be ordered gets ordered first so the job doesn’t stall mid-wall.
- 3
Demo and rough-in. The old tub and surround come out, and we inspect the framing, subfloor and drain for anything that needs correcting. If we find an issue the estimate didn’t cover, we stop and talk to you before proceeding.
- 4
Waterproofing, tile and fixtures. The shower pan and walls get built and sealed with Schluter Systems components, then tiled and grouted. Fixtures go in last, once the surfaces are set and protected.
- 5
Walkthrough and cleanup. We test the drain and enclosure, clean the site, and walk the finished shower with you. Your sign-off happens in person, and any punch-list items get handled before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub to Shower Conversion Cost in Henderson?

A typical tub-to-shower conversion in Henderson runs $3,255 – $9,300, depending on the size of the shower, tile choice, fixture tier and whether the rough-in plumbing needs correction. If you’re replacing a shower that already exists rather than converting a tub, shower replacement typically runs $2,790 – $7,905, and a full walk-in shower installation runs $4,185 – $11,160. All of these are estimated ranges; the written estimate sets the final price.
What moves the number most: the shower footprint and whether the drain has to be relocated, the tile you choose and how much of it there is, and the fixture tier. A Moen valve with a standard trim sits at the lower end of the range; a premium Grohe or Kohler setup sits higher. Waterproofing is not the place to cut corners, because a shower that leaks costs far more to fix than the membrane ever would have.
| Service | Typical Estimated Range |
|---|---|
| Tub-to-shower conversion | $3,255 – $9,300 |
| Walk-in shower installation | $4,185 – $11,160 |
| Shower replacement | $2,790 – $7,905 |
| Full bathroom remodel | $8,370 – $26,040 |
| Small bathroom remodel | $4,650 – $11,160 |
| Bathroom vanity installation | $745 – $2,790 |
To avoid overpaying, ask for a line-item estimate rather than a lump sum, and confirm that waterproofing, tile and fixtures are all included. Our estimates are free and itemized, so you can compare them fairly against other quotes. Call (833) 954-6011 for an exact quote on your bathroom.
Tub to Shower Conversion Near Henderson – Our Service Area
We work with homeowners across the Las Vegas Valley, including Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, Boulder City, Spring Valley, Summerlin, North Las Vegas, Las Vegas and Sandy Valley. Scheduling is straightforward: call, get a free estimate, and we’ll confirm an install window that fits your timeline. If you’re comparing this against a bigger project, our Bathroom Remodeling Henderson page covers the full scope, and you can also read more about Henderson and neighboring Whitney for local detail.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Tub to Shower Conversion in Henderson

A tub-to-shower conversion removes an existing bathtub and replaces it with a walk-in shower built in the same footprint. It involves demo, new waterproofing, a shower pan, tile and new fixtures. Unlike a simple tub replacement, it changes how the space is used and usually gains usable floor area. Call (833) 954-6011 to talk through whether your bathroom is a good candidate.
Most conversions take several days of on-site work, spread across demo, waterproofing, tile and fixtures. The exact timeline depends on the shower size, tile complexity and whether the rough-in needs correction. Fixture and tile lead times can add to the schedule if items need to be ordered. Your written estimate includes a realistic timeline before work begins.
A typical conversion runs $3,255 – $9,300 in the Henderson area. Tile choice, fixture tier and drain relocation are the biggest price factors. All figures are estimates, and your written line-item estimate sets the final price. Call (833) 954-6011 for an exact quote; estimates are free.
Yes. We work with Kohler, Moen, Delta, American Standard and other professional fixture brands. That means you can match the trim to your budget and the look you want instead of accepting whatever a single supplier stocks. We’ll talk through valve compatibility and finish options during selections. Call (833) 954-6011 to set up a free estimate.
Same-day service is available when the schedule allows. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday; a call outside dispatch hours is booked into the next opening.
We stand behind the installation with a workmanship warranty, and the fixtures carry their manufacturers’ warranties. We’ll spell out what’s covered before work starts so there are no surprises. If something goes wrong after the job, call us and we’ll take a look. Call (833) 954-6011 with any warranty questions.
Clear the bathroom of personal items, towels and anything on the walls, and make sure we have access to the room and a nearby outlet. If the bathroom is the only one in the house, plan for alternate facilities during the install days. We’ll confirm the schedule and any prep details when we book. Call (833) 954-6011 to get started.
Schedule Your Tub to Shower Conversion Service in Henderson Today
Ready to trade that unused tub for a walk-in shower built with proper waterproofing and fixtures you actually chose? Call (833) 954-6011 to schedule your free, no-obligation estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. You’ll get a written, line-item quote and a clear timeline before anything starts. Bathrooms are the only trade we work in, and it shows in the details.
Written by the team at Bathroom Remodeling Henderson.










